Monitor Arm with USB-C and USB-A
Monitor Arm with USB-C and USB-A
A gas-spring arm with USB-C and USB-A built into the base. It carries a screen from 17 to 40 inch weighing up to 11 kilos, and one hand sets it to the height and angle you want.
Read moreRead less
A screen on its own stand sits at the height the stand happens to give it, and it takes up the desk underneath. This arm lifts it off the surface and holds it at eye level, which frees the desktop and takes the strain off your neck.
The gas spring carries the weight, so you set height and angle with one hand and the screen holds its position. One screw adjusts the tension to the weight of your monitor, which is what keeps a heavier 40 inch screen from sinking.
Mounting is done from the top of the desk with the supplied clamp, or through a cable hole with the grommet fitting. The USB-C and USB-A 3.0 ports in the base keep charging within reach, and the cable channels along the arm keep the wiring out of sight.
Your screen exactly where you want it.
Your desk stays clear
The screen floats above the desktop, which frees the whole surface underneath and puts the display at eye level. Only the base stands on your desk.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or at another angle. It stays where you leave it.
Charging on your desk
A USB-C and a USB-A 3.0 port sit in the base, so charging happens at the front of your desk instead of behind your computer.
Your desk stays clear
The screen floats above the desktop, which frees the whole surface underneath and puts the display at eye level. Only the base stands on your desk.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or at another angle. It stays where you leave it.
Charging on your desk
A USB-C and a USB-A 3.0 port sit in the base, so charging happens at the front of your desk instead of behind your computer.
Will it fit your desk and your screen?
The measurements to check before you order.
The full details.
Frequently asked questions
Which screens fit this arm?
One monitor from 17 to 40 inch weighing up to 11 kilos, curved screens included. Your screen does need VESA holes on the back, in 75×75 or 100×100 mm.
Will it fit my desk?
The clamp holds a desktop from 10 to 50 millimetres thick. If you would rather mount through a cable hole, the opening needs to be 10 to 60 millimetres across. Both fittings are in the box, so you can decide once the arm is in front of you.
How high do the screens go?
The mounting point sits between 233 and 484 millimetres above your desktop. That height is measured to the middle of the VESA plate, so roughly the middle of your screen rather than the top or bottom edge.
How far does the arm reach across the desk?
Between 528 and 567 millimetres from the base, depending on how far the middle section is extended. That is enough to pull the screen towards you when you need it and push it back out of the way when you do not.
Does a heavier screen sag?
Not once the tension is set. One screw matches the gas spring to the weight of your monitor. Turn it up for a heavy 40 inch screen and down for a light one, and the arm holds every position.
What are the USB ports for?
There is a USB-C port and a USB-A 3.0 port in the base, at the front of your desk. They are handy for charging a phone or connecting a peripheral without reaching behind your computer.
Can I stop the arms from hitting the wall?
Yes. The base has a rotation stop you can set, which limits how far the arm swings. Against a wall or in a corner that keeps your screen from touching anything behind it.
What do I need to mount it?
Nothing extra. The clamp, the grommet fitting, all screws and the instructions are in the box. Mounting is done from the top of the desk, so you do not have to crawl underneath.
What about warranty and delivery?
You get a 5-year warranty, free shipping and free returns. Delivery takes 3 working days.
One screen, one clear desk.
Free shipping, free returns and a five-year warranty.
